XY-1A Engineering Drilling Rig Machine Introduction
Xy-1a drilling rig is a hydraulic feed portable drilling rig, 150 meters drilling depth ,150mm hole diameter ,which is suitable for engineering geological exploration of industrial and civil buildings, railways, hydropower, transportation, bridges, dam foundations and other buildings.
XY-1A Engineering Drilling Rig Machine Tech Data
|Drill rod diameter||42mm||Spindle pull-down||Max.15KN|
|Angle range||90-75||Spindle lifting capacity||Max. 25KN|
|Oil pump||Water pump|
|Model||YBC-12/125||Model||Horizontal reciprocating single-acting piston pump|
|Rated pressure||12.5Mpa||Working pressure||Max. 1.25Mpa|
|Max. lifting capacity||15KN||Model(diesel engine||ZS1105|
|Hoisting drum revolution|
|Drum diameter||140mm||Rated speed||2200r/m|
XY-1A Engineering Drilling Rig Advantages
a. five gears, and the highest speed can reach 1045r/min, improving drill efficiency
b. 53 x 59 drilling rod adopted, high rigidity and strong delivery torque.
c. the machine is equipped with national patent technology---taper clutch, with charactristics of strong transmission troque, easy operation and free maintenance.
d. for the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch.
e. Vertical spidle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geoloical conditions.
XY-1A Engineering Drilling Rig Application & Scope
XY-1A drilling rig is mainly used for geological general investigation and exploration, road and tall buliding foundation exploration, kinds of hole in concrete structure, river levees,earth temperature central air-conditioner,etc.XY-1 Series are spindle core geotechnical drilling rigs most perfectly suitable for borehole drilling in geo-construction and geo-technical exploration drilling in projects like civil building, construction of railway, hydropower, highway, bridge and dam etc. Typically, they are mainly used for:
How do you test soil before building?
Soil engineers bore holes in the soil and take samples. These samples are then tested in order to determine the suitability of the soil. Soil engineers can test the soil before construction, during the construction process and after construction is complete to ensure ongoing compatibility